Tub Cut Outs

Tub cut outs offer a safe and easy way for anyone to enter and exit a bathtub/shower combination. Bathtub conversion can change a steel, porcelain, fiberglass or acrylic bathtub into a shower for a fraction of the cost of installing a new walk-in shower.

The two main reasons a lower curb height is beneficial are safety for seniors and easy accessibility for the handicapped. According the U.S. census figures, the leading accident for Americans over 65 is falls in the bathroom area. Handicap bathtubs make life much safer and easier for a handicapped person and for their caretaker to access the shower. Tub cut outs are a cost effective solution for senior residence facilities and nursing homes where there may be many tubs that need converting.

Bathtub Conversions

A bathtub conversion is an upgrade that creates a lower curb height to the side of a bathtub and allows a person to step directly into the tub. This means they do not have to lift their foot over the tub wall causing them to lose their balance and fall. There is only a small step usually 3 to 4 inches in height to walk over. Tub cut outs also make it easier for a person who is sitting to swing their legs into the tub with a transfer bench. A person sits on the transfer bench and slides from the outside of the tub to the inside.

Installation Process

Tub cut outs are installed by a professional who first removes a section of the tub wall and then seals the cut sections. There are two types of seals for the cut out including a cap that is fit over the cuts and a flat surface that is fit within the cut. This type leaves a smooth surface. The removed section can be only four inches deep to as deep as eleven inches. The deeper cut may cost more because of more work involved. Some tub cut outs can be restored to their original condition at a later date.

If easier access is required for a shower, it is much less expensive and faster to install a bathtub cutout. In most cases, the work can be completed in less than one day and sometimes in one hour. Cast iron tubs take a little longer than one hour. There is no impact to existing floors and walls. The professional installers clean as they work, so there is no dust, unpleasant odors or mess. After completion, a simple shower curtain prevents the water from splashing outside the tub. The curtain rod may need to be lowered.


The alternative is to do a complete bathroom remodeling, which is expensive and can disturb the household for weeks. The existing plumbing may need to be redone which can cost hundreds of dollars alone. The cost of tub conversion depends on the type of bathtub. Steel and fiberglass tubs cost approximately $900, and cast iron costs approximately $1200.

Tub conversions restore independence to seniors and handicapped people and give peace of mind to their care takers. A slip-resistant texture is also applied to the new step and bottom of the bathtub for added safety.

Using Night Lights In The Home

A night light is a small device that provides gentle illumination in dark rooms and at night. They are much smaller than traditional lamps and can operate for days at a time if necessary. Most designs plug directly into an electrical socket and emanate light from the outlet. Others use batteries and hang on walls or baseboards. These designs use standard hooks and nails or adhesive strips to stay in position. Night lights are familiar to many people because they help to calm children who are afraid of the dark. They also have practical uses for adults.

Advantages of Night Lights

Night lights are a convenient option for good lighting in the home for several reasons. The lights are small and take up almost no space. They do not make it difficult to walk down stairs or along hallways because of the low profile of each unit. They generally only extend an inch or two beyond the wall. New energy-efficient models that use light-emitting diodes (LEDs) require an almost negligible amount of electricity to operate every night. Some units have motion sensors or light detectors that cause the night light to activate automatically when someone is nearby or the room is dark. Night lights are very safe and easy to operate. Some even have distinctive designs that match the decor of the home making it easy to disguise electrical outlets.

Night lights will improve the quality of life for the people in a home in a variety of ways. The lights provide illumination at night that will help to prevent falls that could result in serious injuries. Marking hallways or doorways with lights will make it easier to move around the home at night without having to turn on bright overhead fixtures. Individuals who have vision problems or certain sleep disorders will find it easier to fall asleep at night if the room is not completely dark. Night lights are frequently used in the bedrooms of children who do not enjoy being along in the dark.

Where To Put Night Lights

motion-sensors-lights-itemNight lights are useful in a variety of situations. Installing a night light in the bathroom makes it easy for anyone to use the sink or toilet at night without having to turn on a bright overhead bulb that could cause vision problems and make it hard to get back to sleep. It is also common to find a night light in the kitchen where someone might want to get a glass of water in the middle of the night. Some people use night lights in the living room in order to provide a small amount of light while watching a movie or relaxing. The lights are invaluable on staircases or around areas where there are changes in elevation. The small amount of illumination will prevent falls and foot injuries.

Motion Sensor Lights

  • Recommended Motion Sensor Lights – Provides long lasting light on a few batteries. The LED technology also assures a very long light life. Bright enough to help you see through the night but not too bright where it is blinding at night.

Even the highest quality night lights with motion sensors are relatively inexpensive. The majority of models available cost only a few dollars. There are now several types of night lights available. Some use small traditional incandescent bulbs that eventually burn out and require replacing. Designs that are more modern use LEDs that last for tens of thousands of hours and do not need replacing. The most common maintenance performed on a night light is regular dusting to keep the unit clean.


Sponsored Ads

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.